Magnetic Stirrers
Bellco Glass, Inc. Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabi
Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabi
Bellco Glass, Inc. Bell-Stir 1 Position, 115V - 8L
Bellco Magnetic Stirrers are specifically designed for growing both mammalian and bacterial cultures where minimal heat transfer from the magnetic stirrer to the culture vessel is essential. They are ideal for tissue cultures grown in spinner flasks. Bellco incorporates low wattage DC motors to reduce stirrer heat up. Independent power and speed controls allow unit to maintain a speed setting when switched on and off. Powerful magnets rotate on ball bearing shafts for increased coupling and continuous maintenance free service. Polyurethane drive belts resist humidity and temperature. The 100V, 115V & 230V models feature a convenience outlet that allows daisy chaining of up to ten stirrers. . MADE IN THE USASpeed range: 30 - 1000 rpm +/- 5%
Electron Microscopy Sciences PTFE Magnetic Stirrer UK, 50-800 RPM
All parts are fully encapsulated in a "PTFE" body so stirrer is totally inert to the most aggressive laboratory conditions. Features a speed display, reversible spin mode, no heat transfer to media, and stutter free motion. 24 Volt stepper motor with controlled acceleration and deceleration and stall detection. Ambient temperature range 0 – 40 degree C. PFA covered lead cable fused into body.
RPM: 50-800
Bellco Glass, Inc. 2 Position Process Stirr Complete, 115V
Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring technology. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. The Bell-ennium single position low profile chassis measure 10 x 11 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. Units are powered by standard 24V in-line power supplies and are CE compliant.. MADE IN THE USA
Bellco Glass, Inc. 2 Position Process Stir Complete, 230V
Bell-ennium Magnetic Stirrers are designed for both cell cultures in spinner flasks as well as for general laboratory procedures requiring the use of magnetic stirring equipment. Bell-ennium stirrers offer the laboratory researcher a wide range of capabilities and the latest innovations in stirring technology. Bell-ennium stirrers feature brushless maintenance free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. The Bell-ennium single position low profile chassis measure 10 x 11 x 3 3/8” and are designed to fit side-by-side in Bellco incubators. Units are powered by standard 24V in-line power supplies and are CE compliant.. MADE IN THE USA
Electron Microscopy Sciences Megamag-Genie, 50hz, European Plug, 230 V
The powerful single-position MegaMag Genie and Digital MegaMag Genie magnetic stirrer provide the optimal stirring for large volume containers. Powerful magnet and motor offer exceptional magnetic force capable of stirring up to 38L. Can Be Used in cold rooms and incubators.
2Mag USA BIOMIXCONTROL CONTROL UNIT
- Compatibility with 1 bioMIXdrive stirring unit
- Speed range of 5 to 250 rpm
- Maximum stirring power of 40 W
- 10-step power setting from 4 to 40 W or 10-100%
- Digital display for precise control
- Stainless steel housing for durability
- SoftStart function for gradual stirring
- QuickSet function for simplified operation
- Operating conditions of 0 °C to +40 °C at 80% humidity
- Electrical data of 100-240 V / 50-60 Hz / 1.5 A
- Voltage output of 48 VDC
- Dimensions of 200 x 155 x 38 mm
- Protection class IP20
- Gross weight of approximately 1.9 kg
- Warranty period of 3 years
SINGH INSTRUMENT LLC LiStir 3P Heated Stirrer for SBS Format Plates and blocks
LiStir 3P offers precise homogeneous mixing in all 96 wells of an SBS plate. Its innovative stirring design removes all edge effects normally seen in high count multi well stirrers - making its the leading instrument for high thought-put research. Design to integrate under a liquid handler, this Stirrer has three positions that allow SBS formal plates and blocks. Temperature ranges from RT to 180C. Stirring speed ranges from 50 RPM to 800 RPM. Its shell is all 316SS construction and its controls box is detached from the unit making is suitable to be used inside a glovebox, or a hood. It can be either controlled as a standalone unit or controlled via a PLC or a computer.
Chemglass Life Sciences Stirrer, Magnetic, Two Position, Dura-Mag, with Factory Installed Alarm, 120V
Stirrer, Magnetic, Two Position, Dura-Mag, with Factory Installed Alarm, 120V. Dura-Mag™ digital, front-end, magnetic stirrers are designed for both cell culture in spinner flasks as well as general laboratory procedures requiring the use of magnetic stirring equipment. Dura-Mag™ stirrers feature brushless, maintenance-free DC motors with drive assemblies designed for quiet operation. Stainless steel covers are stamped to show the vessel positions for accurate placement and optimum performance. Dura-Mag™ 2-position, low profile chassis measure 9.5" W x 22.5" D x 3.5” H(front to back measurement includes power cord and control knob) and are designed to fit side-by-side in most incubators. Maximum flask size is (2) 8L vessels. Optional factory installed motion alarm available. Speed range: 25-400RPM.
Chemglass Life Sciences Stirrer, Magnetic, Nine Position, Dura-Mag, 230V, with Factory Installed Alarm
Trouble-Free Brushless MotorIntegrated Power Supply, for 100 to 220V ServiceHeavy Duty Magnets and Drive SystemTrouble-Free Non-Slip Toothed Kevlar Belt Design with Easy ReplacementStainless Steel Stirrer Plate CoverSpeed Range from 25 to 400RPM with Clockwise ControlDimensions: 16.75" W x 19.25" D x 3.5" H(front to back depth measurement includes power cord and control knob).The Chemglass Life Sciences Nine-Position magnetic stirrer is a rugged design for 24/7 laboratory or production applications.The small footprint is ideal for CO2 incubators with maximum capacity of (9) 500mL spinner vessels.Optional factory installed motion alarm available.Please note: An Optional Flask Centering Template for Corning Disposable 500mL Spinner flasks is available.Installing the drop on template ensures the Corning Disposable Spinner flasks are centered directly over the magnet for optimal stirring.
Cole-Parmer Five-Position Stirrer, 120 VAC
These multiposition stirrers offer more versatility than single-position stirrers. Stirrers are available with five or nine stirring positions. Each stirring position is individually controlled so you can perform different mixing applications simultaneously.
Sigma Aldrich Fine Chemicals Biosciences 2MAG MIXdrive 24 MTP1EA
Ultra flat wear-free magnetic stirrer with 6/12/24/96 stirring positions suitable for microtiter plates.All stirring positions 100 percent maintenance-free and wear-free by inductive 2mag-Magnetic-Drive concept for powerful mixing of solutions 100 percent synchronized speeds jerk-free stirring even at low speeds.Fully encapsulated and hermetically sealed stainless steelhousing IP68 water- dust- and germproof extremely robustconstruction and performance easy to clean and maximumresistance submersible in water- resp. oil baths up to 50 C.
Sigma Aldrich Fine Chemicals Biosciences 2mag MIX 6 multi position1EA
Ultra-flat magnetic stirrer with 6 stirring positions up to 6000 mL stirring volume suitable for 6 x 1000 mL flasks.Powerful 6 stirring positions 100% maintenance-free and wear-free by inductive 2mag-Magnetic-Drive concept extremely wide speed range of 100 to 2000 rpm 100% synchronized speed jerk-free stirring even at low speeds 4-step power settings of the stirrer high power setting for viscous liquids and reduced power setting for long-term operation without any heating effects caused by the stirrer..nbspMaintenance-free.nbspSynchronized stirring of 6 x 1000 mL flasks.nbspSoftStar setting for reliable jerk-free centering of stirring bar.nbspClear digital display.nbspAutomatic memory saves last settings
Research Products International Corp MultiMagstir Genie, Four Position Magnetic Stirrer
The revolutionary MagStir Genie provides low to high speed stirring and editable memory profiles. Microprocessor controls offer precision and reproducibility without internal heat build-up.
- Speed range of 10-1800 RPM including reverse and interval stirring for applications ranging from gentle stirring for cell culture to aggressive mixing for viscous polymers.
- May be used with any regular flask/beaker or spinner flask.
- Three power levels available for various sample viscosities.
- Low-profile magnetic stirrer uses microprocessor control for precise and reproducible operation without heat build-up from internal friction.
- Manual mode provides stir, stir reverse, and time functions.
- Profiles mode allows users to quickly program speed, ramp rate, stir direction, time (including pause), and power level in up to 9 distinct steps.
- Two year warranty.